Coolmax 18 watt Dimming Driver

Dimmable by almost all Dimming Mechanisms
Including C- Bus and 0-10 volt input

The Coolmax 18 watt Dimming Driver is the perfect companion for almost all LED chips demanding up to 18 watts with a drive voltage of 9-24 volts DC with a 700mA  drive current.
It is dimmable by almost all dimming mechanisms (including C-Bus) except the Creston dimmer.

 This driver will run all brands of LED chips that need a controlled  700 milliamps of DC current up to 24 volts. No additional correction electronics or other control gear is required. It is compatible with Cree,  Nichia, Phillips, Epistar, GE, Osram, SunLed and most major brands LED chips.
Ideally it will drive 3 - 6 led chips  dependent on internal configuration.

It is essential to check with the LED chip manufacturer to ascertain the correct LED drive current accurately.

This driver comes as a bare bones driver with large input terminals to accommodate the 2 x 1.5 mm cables commonly used in Australian buildings. This driver comes with current SAA and C-Tick approval and certification.

There is a 12 moth warranty provided the driver is not touching insulation material. A thermal cut out will disable the driver at 60 deg C & void the warranty.