If you have the tools, the correct solder and the expertise, then it is very simple to cut & terminate the Coolmax LED strips. If, However, If you do not have the experience in this field then this is a service we provide.
Many Electricians do not have the special temperature controlled soldering irons, the workbench or  the on site time to cut and terminate LED strips. 

So when you buy any length of Coolmax LED strip we can terminate the end for you.

Whether it be 200mm or a full 5 metre roll of any of our strips we will cut, terminate and solder a low voltage tail on to your strip. We will also heatshrink a collar to your strip to minimise installation damage to the termination.

Simply buy your required lengths from the our "Cut to Length" service, including how long you want your low voltage feed in tails in the "Comments" box on your order, and we will do the rest. We will ring you to confirm your order before we make it up.

For instance, your "Comments" box in you order might look like this;
1 x 570mm with a 1500mm tail
1 x 200mm with a 900mm tail
1 x 900mm with 2 tails 50mm and 1200mm

This would be 4 terminations.